| Sunsei SE-CC10000 10 Amp Solar Charge Controller |  | Brand: Sunsei
Category: Lawn & Patio
This item is no longer available
Rating:  5 reviews
Sales Rank: 24,297
Autographed: No
Memorabilia: No
Shipping Weight (lbs): 2.3
Dimensions (in): 8.3 x 5 x 2.7
MPN: 11000 WSL
Model: SE-CC10000
UPC: 775540110006
EAN: 0775540110006
ASIN: B000CPHXUI
Tell A Friend
Add to Wishlist
Add to Wedding Registry
Add to Baby Registry
| |
| Features:
| • | 10 Amp solar charge controller ideal for ICP solar panels generating up to 10 Amps of current | | • | Works to avoid overcharging your battery | | • | Intelligent PWM charge control ensures batteries reach max capacity | | • | Built-in LED indicator that displays charging status; auto-reset circuit breaker for reverse polarity and surge protection | | • | For charging 12-volt battery systems |
|
| Similar Items:
| |
| Editorial Reviews:
Amazon.com Product Description
The Sunsei 10 Amp solar charge controller is a perfect match for ICP solar panels generating up to 10 Amps of current for 12-volt battery systems. With Intelligent Pulse Width Modulation (PWM), the charge control ensures that batteries reach their maximum capacity without overcharging. Other features include a built-in LED indicator that displays charging status from the panel and the battery and an auto-reset circuit breaker for reverse polarity and surge protection.
|
| Customer Reviews:
 Doesn't work ! August 7, 2009
James W. Cencebaugh (Clayton, NY, 1000 Islands Region)
1 out of 1 found this review helpful
I used this controller once, it worked. Second time, the led doesn't come on. I went camping and my battery went dead. All connections are tight and conected properly. Help, is there anything I can do , to get it to work. Email me at [...] if you have an answer I have the Sunsei 22 watt solar panel. Thanks, Jim
Poor quality, then failed, and discharged my battery June 15, 2009
Ronald J. Flory (Toney, AL)
1 out of 1 found this review helpful
Poorly mechanical design. The screw-in wire connectors are weak and sloppy, making it impossible to achieve reliable connections (I had to solder directly to them). After about 2 months, I noticed the charger had failed and my 12V marine battery had been discharged to 10.5V.
 Good value for the money. November 30, 2008
Francis
2 out of 2 found this review helpful
Good little charge controller.
Operational for a few weeks now.
Would have given five stars if the manual
was clearer, more precise and complete.
Cheap and reliable September 12, 2008
Brian (Austin, TX United States)
2 out of 2 found this review helpful
Does a great job keeping my AGM lead acid battery up to charge without risking any damage to it.
Great CC... no TC October 15, 2007
gerchikov (Mountain View, CA United States)
21 out of 21 found this review helpful
CC-10000 is a fantastic charge controller, simple, reliable and inexpensive. Unlike most of its competitors in the same price range, it's a two-stage controller. It will float at 13.7V but will boost up to 14.5V for up to two hours once battery has dipped below 12.5V. (Morningstar's SunSaver just maintains constant voltage (14.1V for sealed/14.4V for flooded batteries) -- way too high for float but not quite enough for absorption). It goes without saying that it's a PWM design, for efficiency and long battery life.
My only complaint about it: it is not temperature-compensated (I've just confirmed this with the manufacturer). This should be OK if it is used indoors only (as the manual unconspicuously recommends), or in the mild climate. If, on the other hand, it is used e.g. in sub-freezing temperatures, it will under-charge the battery by half a volt or more. So if you absolutely must have temperature compensation, check out CC-25000 (twice the price) or consider another brand.
|
EnergyRefuge.com Solar Store | |
|
|
|
|
|
CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED ‘AS IS’ AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME. Copyright © EnergyRefuge.com 2006. All rights reserved. Information about prices, products, services and merchants is provided by third parties and is for informational purposes only. EnergyRefuge.com does not represent or warrant the accuracy or reliability of the information, and will not be liable for any errors, omissions, or delays in this information or any losses, injuries, or damages arising from its display or use. | |
